Black 20mm Subaru ZN6/ZC6 BRZ Wheel Spacers 12-24

A pair of wheel spacers for the ZN6/ZC6 BRZ from 12-24.

These spacers are supplied as a kit and will space the wheels on the car by 20mm on each side. Made from 6061-T6 Aluminium and anodized black these spacers are corrosion resistant. Most of our spacers are hubcentric which means that they will be perfectly centred on the hub. Centering the wheel prevents vibration. See the specification below to confirm if these are hubcentric.

Spacing the wheels on the car gives a more aggressive stance and can also improve handling.

Spacer Specification:

Colour – Black 
Thickness – 20mm  
PCD – 5 x 100 
Spigot – 56.1
Hubcentric – Yes 
Material – 6061-T6 Aluminium 
Finish – Anodized 
Construction – Forged
Thread – M12 x 1.25 

Vehicle Specification:

Make – Subaru 
Model – BRZ 
Chassis – ZN6/ZC6 
Year – ’12-24 
Note – n/a

Clearance Checking

– When fitting spacers it is important to ensure there is enough space in the wheel arch to clear the wheel and tyre. If there is not sufficient space to fit the spacers safely you will need to either roll the arches or modify the arches with a wide arch kit or similar.

– It is also vital that you check the wheel rotate freely after fitted and if using closed wheel nuts that they are not bottoming out on the studs.